
...the world's most energy friendly microcontrollers
Bit
Name
Reset
Access
Description
This bit indicates that TIMERn_CC0_CCV contains a valid capture value. These bits are only used in input capture mode and are
cleared when CCMODE is written to 0b00 (Off).
Value
0
1
Description
TIMERn_CC0_CCV does not contain a valid capture value(FIFO empty)
TIMERn_CC0_CCV contains a valid capture value(FIFO not empty)
15:11
Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1
(p. 3)10
CCVBV2
0
R
CC2 CCVB Valid
This field indicates that the TIMERn_CC2_CCVB registers contain data which have not been written to TIMERn_CC2_CCV. These
bits are only used in output compare/pwm mode and are cleared when CCMODE is written to 0b00 (Off).
Value
0
1
Description
TIMERn_CC2_CCVB does not contain valid data
TIMERn_CC2_CCVB contains valid data which will be written to TIMERn_CC2_CCV on the next update event
9
CCVBV1
0
R
CC1 CCVB Valid
This field indicates that the TIMERn_CC1_CCVB registers contain data which have not been written to TIMERn_CC1_CCV. These
bits are only used in output compare/pwm mode and are cleared when CCMODE is written to 0b00 (Off).
Value
0
1
Description
TIMERn_CC1_CCVB does not contain valid data
TIMERn_CC1_CCVB contains valid data which will be written to TIMERn_CC1_CCV on the next update event
8
CCVBV0
0
R
CC0 CCVB Valid
This field indicates that the TIMERn_CC0_CCVB registers contain data which have not been written to TIMERn_CC0_CCV. These
bits are only used in output compare/pwm mode and are cleared when CCMODE is written to 0b00 (Off).
Value
0
1
Description
TIMERn_CC0_CCVB does not contain valid data
TIMERn_CC0_CCVB contains valid data which will be written to TIMERn_CC0_CCV on the next update event
7:3
Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1
(p. 3)2
TOPBV
0
R
TOPB Valid
This indicates that TIMERn_TOPB contains valid data that has not been written to TIMERn_TOP. This bit is also cleared when
TIMERn_TOP is written.
Value
0
1
Description
TIMERn_TOPB does not contain valid data
TIMERn_TOPB contains valid data which will be written to TIMERn_TOP on the next update event
1
DIR
0
R
Direction
Indicates count direction.
Value
0
1
Mode
UP
DOWN
Description
Counting up
Counting down
0
RUNNING
0
R
Running
Indicates if timer is running or not.
19.5.4 TIMERn_IEN - Interrupt Enable Register
Offset
0x00C
Reset
Access
Name
Bit Position
2011-04-12 - d0001_Rev1.10
264
www.energymicro.com